FTDI-Breakout
Das FTDI-Breakout ist ein USB zu Seriell Adapter mit FTDI Chipsatz.
Alternative: CP2102N-Breakout mit SiLabs Chipsatz
Features
- FTDI FT231X USB UART Bridge (up to 1M baud)
- 3.3V or 5V logic supply voltage selectable by switch
- Output current max: 450mA @ 5V and 250mA @ 3.3V
- Digital outputs high voltage always 3.3V
- Input low level: <= 0.8V
- Input high level: >= 2.0V
- Rx + Tx Status LEDs
- Overcurrent protection (resettable polyswitch fuse 5V)
- Standard 6 pin connector with GND, CTS, VCC, TX, RX, DTR
- microUSB (v2.x) or USB-C (v3.x) connector
Shop
- Watterott electronic Shop (Deutschland)
- Händler und Distributoren