Compatible Displays

DisplaySizeResolutionLED
CPT / Chunghwa Picture Tubes
CLAP070LF02CW7.0”800 x 480140mA @ 10V
DEM / Display Elektronik
480272E-TMH-PW-N4.3”480 x 27220mA @ 22V
480272G-TMH-PW-N4.3”480 x 27240mA @ 16V
480272I-TMH-PW-N4.3”480 x 27220mA @ 22V
800320A-TMH-PW-N4.6”800 x 32060mA @ 19V
800480D-TMH-PW-N5.0”800 x 48040mA @ 23V
800480E-TMH-PW-N5.0”800 x 48040mA @ 23V
800480Q TMH-PW-N5.0”800 x 48040mA @ 20V
800480S TMH-PW-N5.0”800 x 480120mA @ 13V
ER / East Rising
TFT043-34.3”480 x 27215mA @ 25V
TFT050-35.0”800 x 48040mA @ 19V
TFT070-47.0”800 x 48040mA @ 22V
Hantronix
HDA500-GH5.0”800 x 48040mA @ 23V
HAOYU
HY43-LCD4.3”480 x 27240mA @ 20V
HY5-LCD-HD5.0”800 x 48040mA @ 19V
HY050CTP-HD*5.0”800 x 4805V (40mA @ 19V)
HY7-LCD7.0”800 x 480140mA @ 10V
HY070CTP-A7.0”800 x 480140mA @ 10V
HY070CTP*7.0”800 x 4805V (140mA @ 10V)
HY070CTP-HD*7.0”1024 x 6005V (160mA @ 9V)
HY070CTP-HD-RGB*7.0”1024 x 6005V
HY070CTP-HD-RGB (IPS)*7.0”1024 x 6005V
HY101CTP*10.1”1024 x 6005V
HTdisplay
HT800050G5.0”800 x 48040mA @ 20V
Innolux
AT050TN335.0”480 x 27240mA @ 20V
Multi-Inno
MI0430AFT-1 (IPS)4.3”800 x 48040mA @ 15V
MI0500PT-55.0”800 x 480
MI0500PT-65.0”800 x 480
MI0500YT-15.0”800 x 480
MI0600BT6.0”800 x 480
Newhaven Display
NHD-5.0-800480TF-ATXL#-T5.0”800 x 48060mA @ 19V
NHD-7.0-800480EF-ATXL#-T7.0”800 x 48060mA @ 16V
NHD-7.0-800480EF-ATXV#-T7.0”800 x 480160mA @ 9V
Riverdi
RVT50UQTNWR0x5.0”800 x 48040mA @ 18V
Universal
KD50G21-40NT5.0”800 x 48040mA @ 19V
Sunbond
LB043024.3”480 x 27240mA @ 21V

* On-board Backlight Boost Regulator, set LED+ and LED- jumpers to 5V.

Note: When using a resistive touchpanel on pin 37-40 the jumpers TP_SDA+TP_SCL+TP_INT have to be open and for a capacitive touchpanel (CTP, e.g. FT5206 controller) the jumpers TP_SDA+TP_SCL+TP_INT have to be closed and VCCIO set to 3V3. The respective firmware has to be also flashed to the HDMI-Adapter microcontroller.

Display Connector Pinout

PinSignal
1LED- (negative) or 5V
2LED+ (positive) or 5V
3GND
43V3
5-12R0-R7
13-20G0-G7
21-28B0-B7
29GND
30Clk
31Disp (low=off, high=on)
32HSync
33VSync
34DE (Data Enable)
35NC (Not Connected) or PWM (for LED)
36GND
37XR/X+ or SDA when TP_SDA closed
38YD/Y- or SCL when TP_SCL closed
39XL/X- or RST
40YU/Y+ or INT when TP_INT closed