Pylontech US2000, US3000 and US5000 48V (15S) battery storage systems for stationary use based on lithium-iron-phosphate (LiFePO4) technology.
Lithium-iron-phosphate batteries are thermally stable (no thermal runaway).
Different models can also be combined. But make sure that the biggest and newest system (on same models) is used as master. When interconnected, the devices should have approximately the same state of charge and when combining USxxxB and USxxxC systems, the USxxxB have to be on position 2-8.
The storage systems contain a battery management system (BMS) with protections against over/under voltage and over current. There are multiple levels of these protections and the last level protection permanently disables the device by actively tripping fuses. The respective fuses can only be repaired by the Pylontech Service. The maximum charge voltage of 53.5V (15 cells) and the maximum peak current of the system must not be exceeded.
To ensure that the battery system is optimally charged and discharged, a communication (RS485 or CAN) with the charger/inverter is recommended and the charging voltage should not be set above 52.5V without communication.
Link for registration and warranty extension: pylontech.com.cn/service/support
Information about Victron products with Pylontech batteries.
Name | Size |
---|---|
Compatiblity_List.pdf | 180 KB |
Herstellererklaerung.pdf | 685 KB |
Maintenance_Tool.pdf | 684 KB |
Multi-Group_without_LV-HUB.pdf | 250 KB |
US2000B.pdf | 1129 KB |
US2000B_DoC.pdf | 433 KB |
US2000B_v2.pdf | 2482 KB |
US2000C.pdf | 1383 KB |
US2000C_US3000C_DoC.pdf | 241 KB |
US3000B.pdf | 2190 KB |
US3000C.pdf | 1023 KB |
US5000.pdf | 1251 KB |
US5000_DoC.pdf | 253 KB |
Voltronic_Inverter_Setup.pdf | 510 KB |
Warranty.pdf | 439 KB |