senseBox Sensors
The senseBox Boards and Shields have connectors for different sensor and addon modules.
Sensors and Addons
- I2C/Wire (JST 4-Pin)
- BME680 (Temperature + Pressure + Humidity + Gas Sensor / Air Quality)
- BMP280 (Temperature + Pressure)
- HDC1080 (Temperature + Humidity)
- TSL45315 + VEML6070 (Light + UV Light)
- CAM-M8Q (GNSS / Position)
- OLED (128x64)
- UART/Serial (JST 4-Pin)
- XBee
- LAN-Bee (W5500)
- WiFi-Bee (WINC1500)
- LoRa-Bee (RFM9X)
- mSD-Bee (microSD)
Pinout of the JST PH Connectors
Digital
| Pin | Function |
|---|
| 1 | GND (Ground) |
| 2 | VCC (Power 5V) |
| 3 | IO1 (Input/Output) |
| 4 | IO2 (Input/Output) |
I2C/Wire
| Pin | Function |
|---|
| 1 | GND (Ground) |
| 2 | VCC (Power 5V) |
| 3 | SDA (Data) |
| 4 | SCL (Clock) |
UART/Serial
| Pin | Function |
|---|
| 1 | GND (Ground) |
| 2 | VCC (Power 5V) |
| 3 | Rx (Receive from Host) |
| 4 | Tx (Transmit from Host) |
SPI
| Pin | Function |
|---|
| 1 | GND (Ground) |
| 2 | VCC (Power 5V) |
| 3 | MISO (Master In) |
| 4 | MOSI (Master Out) |
| 5 | SCK (Clock) |
| 6 | CS (Chip Select) |
Documents